EN 
AR
DE
ES
FR
HI
JA
PT
RU
Contact Us
ROOM 3,27/F.,HO KING COMMERCIAL CENTER, NO.2-16 FA YUEN STREET, MONG KOK, KOWLOON HK
-
19 2019-11
What is filter efficiency?
The percentage of dirt that a filter removes. The filter paper or 'media' determines what the oil, air or fuel has to pass through and where the dirt is trapped. The more twists and turns a particle of dirt has to take, the more likely it is to be captured.
-
19 2019-11
What is the role of the filter?
To separate out and prevent potentially contaminant particles from entering engine. Air and fuel – dust particles and moisture. Oil – metal particles, sludge and carbon.
-
19 2019-11
What is a variable pitch wire?
Takumi uses a variable pitch wire to create the resistance necessary to filter RFI created by an operating ignition system. The variable pitch system alternates tightly wound and loosely wound copper wire around the center of the plug wire to create a magnetic field, creating the necessary resistance with a fraction of the impedance found in a solid carbon core type wire set.
-
19 2019-11
Are Takumi wires 8 mm?
Takumi wires are manufactured to the specific dimensions of OEM wires. Most Takumi wires are 7mm, while Toyota applications are 5mm where applicable. Most 8mm wires in the aftermarket are merely providing additional insulation, and do not increase the electrical capabilities of the ignition system.
-
19 2019-11
What is RFI?
Radio Frequency Interference (RFI) or electrical "noise" is caused by ignition systems, alternators, wiper motors, etc., but the ignition system causes the strongest "noises" and they include a wide range of frequencies. This noise can cause interference with the operation of radios, electronic components, fuel injection systems, depth finders, and other sensitive electronic equipment. Resistor plugs, wires and spark plug caps are used as a RFI suppression system to reduce this noise.
-
19 2019-11
What kind of quality control does TAKUMI have in order to achieve high quality?
We at TAKUMI endeavour to achieve „Total quality“ on three mutually independent levels: - Integrated automatic checks Test modules integrated into the automatic manufacturing cycle check all assemblies to ensure that only those which are in perfect condition remain in production. All others are immediately removed from the line before they give rise to unnecessary costs.
-
19 2019-11
How to judge whether coil need to be replaced or not?
Ignition coil troubleshooting begins by disconnecting a spark plug wire and installing an extra spark plug into the end of the wire. Lay the spark plug on a part of the engine where the plug will be resting against a good ground. Turn the engine over by having a helper hold the key in the start position while the spark plug is observed for a good spark.
-
19 2019-11
How soon can TAKUMI develop new products for customers?
Vehicle manufacturers throughout the world call on the specialist knowledge of the TAKUMI development engineers to design the optimum ignition coils for every engine series including the ignition module if required. We are proud of our short development times and customers appreciate a close working relationship with our engineering teams.
-
19 2019-11
What kind of production line does TAKUMI have for ignition coils?
TAKUMI manufacturing facilities are of modular design suitable for group working and offer maximum flexibility. They can be expanded, scaled down, combined and converted in a short space of time, thus permitting economical and top-quality production of up to 5,000 items a day alternating between large and small series and the various types of ignition coil.
-
19 2019-11
What voltage can TAKUMI igntion coils undertake?
TAKUMI igntion coils can undertake voltage greater than 30 KV
-
19 2019-11
What temperature can TAKUMI ignition coils bear?
Temperature-resistant: up to 150 °C, brief periods up to 165°C
-
19 2019-11
What are the features of TAKUMI ignition coils?
There are four outstanding features of Takumi igntion coils: High-precision ignition components Customer-specific developments and system integration Rational computer-controlled manufacturing techniques High-tech quality based on zero-defect programmes
